Container-to-Margin Spa Program Guide
Most buying decisions in this category come down to unit economics rather than feature lists. This guide walks importers and dealer networks through container loading, minimum order quantities, configuration choices and private-label terms for the REIMS five-person outdoor spa — the reference unit behind our wholesale hot tubs program, and a practical benchmark when you are shortlisting a china outdoor spa supplier.
Container and MOQ Math: 7 Sets Per 20GP, 14 Per 40HQ
These are the REIMS loading figures published on the product page. They are the starting point for every freight calculation, because they decide how many units a container's fixed cost is spread across before the spa ever reaches your warehouse.
| Loading unit | REIMS sets | Typical use |
|---|---|---|
| 20GP container | 7 sets | First order or a single trial lane |
| 40HQ container | 14 sets | Dealer stock and seasonal programs |
| Minimum order | 1 pc | Single-unit evaluation before a container commitment |
- Dry weight is 350 KG per set. That figure drives lifting equipment, crate planning and how much payload you leave free if you combine models.
- The 40HQ carries exactly twice the 20GP volume. Because the freight share is divided across twice as many sets, the per-unit freight cost is roughly halved when a 40HQ is filled.
- Loading is quoted per model. If you want two configurations in one container, confirm the mix in writing before you book freight.
Inside the REIMS Specification Sheet
Before a loading plan means anything, the unit itself has to fit the market. These are the published REIMS specifications, with the six details that most often decide whether a wholesale buyer places the model in a premium or a volume slot.
| Model No. | REIMS |
| Capacity | 5 persons, double-lounge layout |
| Dimensions | 2200 × 2200 × 820 MM |
| Jets | 88 PCS |
| Pumps | 3 × 3.0HP massage pumps, 0.35HP circulation pump |
| Heater / max power | 3KW heater; 10000 W maximum consumption |
| Control system | Balboa & Gecko |
| Shell / frame / base | US Aristech acrylic; stainless steel support frame; sealed ABS base |
| Insulation | High-density PU foam with reflective foil barrier; optional Scandinavian package |
| Electrical | 220V/380V, 50/60Hz |
| Certification | CE / TUV / SAA / SASO |
| Warranty | 5 years |
- 1
Aristech acrylic shell at 18–20 MM. The surface grade is the first thing a showroom customer touches, and the first thing a competitor will try to undercut.
- 2
Stainless steel support frame with a sealed ABS base. A closed base protects plumbing and internal components, which matters for coastal and humid markets.
- 3
88 jets on three 3.0HP massage pumps. Confirm the pump configuration you want quoted, because it drives both performance and electrical planning.
- 4
Balboa & Gecko controls. Specify the platform your own service technicians already stock parts for.
- 5
Ozone, LED level lights and two waterfalls with four fountains. Visual selling points that are already built in, not add-ons.
- 6
25 MM ABS skirting around a 2200 × 2200 MM footprint. A square 2.2-metre body needs a clear delivery route and deck plan.
Match the Installation to the Configuration
The same REIMS unit sells differently depending on where it is installed. Each scenario below pairs a published product fact with the decision a buyer has to make before signing off a program.
Premium residential decks
Product fact: a 2200 × 2200 × 820 MM square footprint with a double lounge.
Buyer decision: survey the access route and deck framing before quoting — a square 2.2-metre body has to pass gates, stairs and corners.
Pool-deck and suite installs
Product fact: 88 jets on 3 × 3.0HP pumps with Balboa & Gecko controls.
Buyer decision: standardise on a control platform your maintenance team already services, so spare parts stay one SKU.
Commercial leisure use
Product fact: ozone, a 3KW heater and a sealed ABS base, backed by a 5-year warranty.
Buyer decision: plan water-care routines and service access at the design stage, not after commissioning.
Retail floor and stock lines
Product fact: 14 sets per 40HQ, with Silver or White Marble acrylic finishes.
Buyer decision: put one finish on the showroom floor and hold the rest in stock, then confirm shades against a physical sample.
Power Supply and Insulation: Two Decisions Buyers Forget
Electrical planning and thermal build-up rarely appear on a quotation comparison sheet, yet both decide whether a container performs in the destination market. Both are specified on the REIMS product page.
Voltage and frequency
The spa is quoted for 220V/380V at 50/60Hz, with a stated maximum power consumption of 10000 W. Have an electrician confirm the supply, breaker capacity and cable run at each installation site before you finalise the order — this is the single most common cause of a delayed handover.
Thermal build-up
The standard build uses high-density PU foam insulation plus a reflective aluminium foil barrier to limit cold-air penetration. An optional Scandinavian Insulation Package adds a 10–15 cm extra-thick thermal cover and enhanced base insulation — the tier to specify for markets with hard winters, and the tier to skip if your customers use the spa seasonally.
Where this lands in the quote
Voltage and insulation tier are configuration choices, not afterthoughts. Fix both in writing at the quotation stage so the unit that arrives matches the market you are selling into.
Wholesale Program Terms at a Glance
These are the commercial terms published for the REIMS model. Use them to compare programs on equal footing rather than on headline price alone.
OEM / ODM and custom made
Custom made is supported and OEM/ODM solutions are available, so a program can carry your own branding and specification sheet.
Silver and White Marble
Two acrylic colour options are listed. On-screen colours may differ from the physical product, so verify the shade against a sample or your local dealer before committing to stock.
220V/380V, 50/60Hz
Both voltage and frequency are configurable at the point of order, which lets one program serve markets with different grid standards.
5-year cover
A five-year warranty is stated on the product page — a term worth quoting directly in your own dealer documentation.
CE / TUV / SAA / SASO
The certification set covers European, Australian and Middle Eastern market entry — check which document your destination customs authority expects.
MOQ from 1 pc
A single set can be ordered before you commit to 7 or 14. Use it to validate the model in your market, then scale to a full container.
From Quote Request to Loaded Container
Manufacturing runs from a 50,000 m² facility under ISO 9001-certified quality management, with OEM and ODM programs supported. The four steps below are the fastest route from an enquiry to a booked shipment.
- Send market and volume. Tell us the destination market, the target container size (20GP or 40HQ) and the model mix you want priced.
- Lock the configuration. Confirm acrylic colour, voltage and frequency, insulation tier and control platform — these are what the quotation is built on.
- Review the quotation. Pricing, lead time, packing and shipping terms come back as one document you can compare against other suppliers.
- Verify before production. Check the finish and specification against a sample or dealer display, and confirm the loading plan before freight is booked.
Please note: actual colours and product may differ from on-screen representation — confirm with your local dealer before ordering.
Price your first container
Tell us your market, your volume and the configuration you need — acrylic colour, voltage and insulation tier — and we will quote the REIMS program against a 20GP or 40HQ loading plan.
Frequently Asked Questions
What information is shown for this product?
Review the product details, images, and specifications presented on the official product page.
Where can I check the intended application?
Use the application and use-case information published on the official product page.
Which specifications should I confirm before ordering?
Confirm the specifications and options listed for the exact product variant before placing an order.
Where can I check available options?
Check the official product page or ask the supplier about options shown for the selected product.
How can I request product information?
Use the official contact or inquiry path provided on the site.
What should I include in an inquiry?
Include the product page, intended use, required quantity, and any specifications you need the supplier to review.
